YOUR POSITION: HOME >PRODUCTS >Separable Connector Series
INTRODUCTION
Page3
    American-style Separable Connector Series
    LT JYM-15/200 Insulating Cap


      Fully insulated, full sealed and touchable, this insulated cap is applied to bushing and bus-bars rated voltage 15kV and current 200A to protect from dust and moisture.

 

 
    DX-T Energy Indicator


     It is easily installed with the indicator attracting eyes that helps you to distinguish whether the cable is energized. The indicators require no external power and are maintenance free.

 


 
    LT T15/600 T Connector


 
   Fully insulated, full sealed and touchable, this elbow connector with indicator is applied to connecting and branching power cable lines that their cross-section of conductor ranges from 50 to 500 mm2 rated voltage 15kV and current 600A.

 

 
   LT T-Ⅱ 15/600 T-Ⅱ Connector



    Fully insulated, full sealed and touchable, this elbow connector with indicator and transfer pole is applied to connecting and branching power cable lines that their cross-section of conductor ranges from 50 to 500 mm2 rated voltage 15kV and current 600A.


 
    LT IMP□-15/600 Loadbreak Junction

    
     Fully insulated, full sealed and muti-output pole, this junction provides two, three, or four codes of rated current 600A through 15kV load breaker."" is the number of branch lines.

 

 

 
    LT YJM-15/600 Insulating Cap


    
Fully insulated, full sealed and touchable, this insulated cap is applied to bushing and junction rated voltage 15kV and current 600A to protect from dust and moisture.




 
    LT ZLT-15/600 Loadbreak Bushing Insert

    

     Smaller volume and lighter weight ,high quality insulation ,this bushing is widely applied to transformers ,power cable branch boxes and other equipments rated voltage 15kV and current 600A for power in and power out.

 

 

 
                        Copyright @2005 wlttec.com   All Right Are Reserved.