YOUR POSITION: HOME >PRODUCTS >Separable Connector Series
INTRODUCTION
Page2
    American-style Separable Connector Series
    LT ZT-15/200 Elbow Slide in/out Power Cable Connector

      Fully insulated, full sealed and touchable, this elbow connector is applied to connecting and branching power cable lines that their cross-section of conductor ranges from 35 to 120mm2 rated voltage 15kV and current 200A. Special arc-extinction function of conductive pole makes it cut off 200A loading current easily.


 
    LT DT-15/200 Loadbreak Bushing Insert


     Smaller volume and lighter weight, high quality insulation, this bushing is widely applied to transformers, power cable branch boxes and other equipments rated voltage 15kV and current 200A for power in and power out.

 


 
    LT ST-15/200 Loadbreak Rotatable Feed-thru Insert


 
   Smaller volume and lighter weight, high quality insulation, it is suitable for high voltage power lines (in or out) of transformers, switchgears and other equipments rated voltage 15kV and current 200A. 

 

 

 
   LT TGZ-15/200 Bushing Well



    Fully insulated, full sealed and operating well with other bushing, this bushing well is applied to transformers and switchgears rated voltage 15kV and current 200A.

 

   

 
    LT IMP-15/200 Loadbreak Junction

    
     Fully insulated, full sealed and muti-output pole, this junction provides two, three, or four codes of rated current 200A through 15kV load breaker. "" is the number of branch lines.

 

 

 
    LT DBG 15/200/SBG 15/200 Insulated Stand off Bushing /Portable
Feed-thru


    
Smaller volume and lighter weight, high quality insulation, these bushings are widely applied to transformers, power cable branch boxes and other equipments rated voltage 15kV and current 200A for power in and power out.

 


 
    LT BLQ-17/50 Elbow Connector/Arrester


 
    Fully insulated, full sealed and touchable, this elbow connector with surge arrester protects power distribution systems from lighting and switching over-voltage.

 

 

 
    LT JDT-15/200 Grounding Elbow Connector



    Fully insulated, full sealed and touchable, it can be used either itself only or with other loadbreak bushing insert, rotatable feed-thru rated voltage 15kV and rated current 200A for visible grounding of power cables, transformers and switchgears.

 

 
                        Copyright @2005 wlttec.com   All Right Are Reserved.